Position: Front Right
Bolt-Center: 108mm
Caliper Body: 2-Piece
Piston DIA: 32mm
Piston Quantity: 4
Piston Material: Aluminum
Disc Height: 32-34mm
Caliper Material: Billet Aluminum
Finish: Nickel Plated
Weight (w/o pads): 2.20 lb. (1000g)
Brake Pads: Included (HH Rated Sintered)
Offset: 22.5mm
Brake Fluid: DOT 4
Note: Single Caliper (banjo bolt and washers not included)
Brembo P/N: 20C02640
Click here to view Caliper Dimensions Reference Guide
The body of this caliper is made entirely from billet and consists in two mechanically connected pieces. Particular attention was dedicated to finding high braking power and stiffness values, obtained tanks to painstaking design, the use of carefully selected raw materials and ultra modern metal machining technology discoveries.
The hydraulics were the focus of a careful fine-tuning. The use of four 32 mm diameter pistons allowed a further increase in braking power and modularity.
This model implements a surface finish borrowed from MotoGP. The nickel plating, in addition to giving it a decidedly attractive look, allowed the already strict machining tolerances to be refined, all to the advantage of performance and operating precision.
The brake pads slide in specific guides, machined onto the body of the caliper itself, which allow brake pad pins to be eliminated.
The Brembo logo is embossed and hand painted in classic Brembo Red. The product includes sintered brake pads which represent the absolute best quality available on the market.
