Note: For (22-25) model years, an ECU flash or Servo Buddy will be required to prevent trouble codes and/or damage to the servo motor (EXCVA).
The provided valve simulator (servo plate) is not compatible with (22-25) models.
- Industry exclusive electro-black stainless muffler
- 2.375" outlet permanent baffle
- Includes removable dB killer
- Stainless steel front section
- Track day design for maximum cornering clearance - ability to lower bike is limited
- No fairing modifications required
- 40% weight savings vs OEM exhaust system
- 18mm bung for wideband O2 sensor
(block-off plug and 12mm bung adapter included)
- Laser engraved Brock's Performance logo
- Includes muffler, front section, and all necessary hardware
- Includes PAIR block-off cap for decel-pop reduction
- Select from increased drivability/fuel mileage (pump gas) or race-proven (race fuel) track maps via our map support program at no additional charge
- Click here to view installation instructions
- Click here to view PAIR block-off instructions
Brock's Performance Predator™ Exhaust Key Features:
Predator™ Electro-Black systems are manufactured using the finest quality stainless steel and then chemical coloring is prepared, using a mixture of chromic and sulfuric acids that develop the thickness of the naturally occurring passive film, on the steel surface. The colors that are produced are the result of light wave interference, as light is reflected from the surface of the thickened oxide passive layer and the interface of the passive layer and steel surface. The colors seen depend on the thickness of the oxide layer formed in this process. Unlike anodizing, as used widely on aluminum products, the process is not an electrochemical one and in contrast to painting, there are no pigments or coloring chemicals used. Perhaps more important, the process does not rely on heat to oxidize the surface. Chemically colored stainless steel retains the aqueous (atmospheric) corrosion resistance of the un-colored surface making the electro-colored system a great option for riders in harsh environments and ocean areas.
(See 500 Hour Neutral Salt Spray Test Certificate)
Advantages of the Electro-Black Predator™ Muffler:
- Better scratch resistance than the basic 304 grade stainless
- UV resistant, won’t fade in the sunlight
- Water and dirt repellent
- Will maintain its appearance without rusting or discoloration
- Stainless steel is an environmentally sustainable choice,
being it is completely recyclable
GSX-R1000 (2017) Exhaust System Decibel Levels
Testing procedure performed according to SAE J2825
Predator™ Full System:
Idle: 108dB / 5000 RPM: 110dB
Predator™ Full System (with Euro-approved dB killer):
Idle: 102dB / 5000 RPM: 104dB
GSX-R1000 (2017) Exhaust Weight Comparison
OEM Full Exhaust System:
- Muffler (w/ clamp & heat shield): 7.00 lb.
- Front Section (one peice): 16.00 lb.
(head pipes, catalytic converter, EXUP, tail pipe, etc.)
Total = 23.00 lb.
Predator™ Full System:
- Muffler: 3.80 lb.
- Head Pipes: 4.20 lb.
- Collectors: 1.40 lb.
- Tail Pipe: 2.05 lb.
- Hardware: 2.05 lb.
- dB Killer: 0.30 lb.
Total = 13.80 lb.
Total Weight Savings = 9.20 lb. or 40% of OEM weight
