The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Street-Pro Aluminum Swingarm (Natural) 0-3" Over w/ Spherical Bearings, Chain Guard and Peg Mounts for Harley-Davidson Dyna (00-17)

(No reviews yet) Write a Review
Street-Pro Aluminum Swingarm (Natural) 0-3" Over w/ Spherical Bearings, Chain Guard and Peg Mounts for Harley-Davidson Dyna (00-17)
  • Handcrafted 0-3” over stock extended aluminum swingarm
  • Shed 50% of unsprung weight vs OEM swingarm
  • Unequaled craftsmanship, engineering and weld quality
  • Replaceable, Aurora™ PTFE® lined spherical bearings pre-installed
  • 6061-T6 aluminum extrusion for dependable strength
  • DOM (Drawn Over Mandrel) seamless tubing axle
  • Includes 11/16” and 3/4” pivot shaft bushings
  • Choose from 3/4", 25mm, 1" or 28mm axle and blocks
  • Reversible billet aluminum axle adjusters and grade 5 steel adjuster bolts prevent axle slide (engraved with Brock's Performance logo)
  • Interior swingarm width measures 10 11/16" at the axle
  • DuPont™ Delrin® chain sliders
  • Natural brushed aluminum finish
  • Includes chain guard
  • Proudly made in the USA
  • Weighs only 15.20 lb. (see product details for more info)
  • Click to view pivot bolt stack-up engineered drawing
  • Important: Dyna Street-Pro™ Swingarm Owners (Please Read)

Please note: When using the 3/4" axle in high power applications, we suggest a wheel configuration which utilizes a double row bearing (or outboard bearing) on the sprocket side.

Will not work with OEM rear brake assembly; aftermarket brake setup is required
(brake arm & mounting tab included)

Dyna Street-Pro Swingarm Weight Breakdown:

  • Bare Swingarm: 10.40 lb.
  • Chain Guard: 1.05 lb.
  • Brake Arm: 0.40 lb.
  • Pivot Bushings: 0.50 lb.
  • Axle w/ Blocks: 2.85 lb.

Total = 15.20 lb.

This product is incompatible with:

2000 Dyna FXDX Superglide Sport

Street-Pro™ Swingarm Application Notes:

  • NOT a 100% bolt-on application - fabrication skills are required
  • Swingarms are wider than OEM to accommodate wider rear tires and may require additional pulley or chain offset, etc...
  • Shock mounts are located to allow original OEM shock length, including 4"-6" over versions
  • Must install (or fabricate/weld, in some instances) longer shock studs or use offset mount rear shocks
  • All rear axle spacers must be fabricated
  • Rear brake configuration must be fabricated. Mounting tab (for use with 3/8 bolt) included for hanging brake arrangement.
  • May need to alter carrier on rear wheel - machine rear carrier face, add a spacer to align with front sprocket location, etc...
  • Note: We have longer (low clearance) carriers for BST wheels. 3.8mm longer to help center wheel in chassis (Available Here).
  • Front spherical bearings come pre-installed from Brock’s Performance, with sized spacers, etc...
  • Because most true performance enthusiasts upgrade to the more robust 3/4" pivot axle, this is our main focus. Your transmission case might need to be modified to accept the larger diameter pivot axle.

American V-Twin Fitment Statement:

Although all attempts have been made to handcraft a product which will fit a wide variety of machines for a particular make/model/year, due to idiosyncrasies between particular years, available options, accessories, etc…, fitment cannot be 100% guaranteed. If upon assembly, fitment issues are discovered which are beyond the installers ability or willingness to correct, then please feel free to contact our customer service department, alert Brock’s Performance of the fitment issue for your particular make/model, and obtain an RMA (Return Material Authorization). Brock’s Performance will accept unmodified swingarms, in 100% resalable condition for a full refund.

Please note, refunds are issued after product inspection at Brock’s Performance, and the customer is responsible for any/all shipping charges.