Note: For model years (22- 25), an ECU flash or Servo Buddy will be required to prevent trouble codes and/or damage to the servo motor (EXCVA). The provided valve simulator (servo plate) is not compatible with (22-25) models.
Note: If retaining the OEM O2 sensor is necessary, an Oxygen Sensor Bung Adapter (M18 to M12) is required to maintain proper sensor fitment and prevent trouble codes.
- Full titanium construction with carbon fiber tip
- World-class craftsmanship, fit and finish
- Low 'throaty' tone is great for everyday riding (noise reduction insert available)
- 58% weight savings vs OEM exhaust system
- 18mm O2 bung pre-installed for wideband O2 sensor (block-off plug included)
- Installation hardware and instructions included
- Includes (Emissions/PAIR) block-off cap and instructions for decel-pop reduction
- Includes Brock’s lifetime direct support package at no additional charge
- Select from increased drivability/fuel mileage (pump gas) or race-proven (race fuel) track maps via our map support program at no additional charge
- Click here to view logo plate color options
- Click here to view Installation Instructions
- Click here to view PAIR block-off instructions
Brock’s ‘best of the best’ under-fairing exhaust system
The Brock’s Performance CT Series™ full titanium exhaust system is a direct result of incalculable hours of engineering/design work combined with real-world performance testing. The entire exhaust system weighs as little as 8 1/4 lbs. and offers the highest power readings out of any of our under-fairing (non-sidewinder) exhaust systems. The CT Series™ not only provides superb cornering clearance, but if you are a weekend drag racer, the system also provides unmatched ground clearance. If world-class craftsmanship and quality, as well as welds that look like ‘art’ are high on your list, then the Brock’s Performance CT Series™ full titanium exhaust system is for you.
GSX-R1000 (2017) Exhaust Weight Comparison
OEM Full Exhaust System:
- Muffler (w/ clamp & heat shield): 7.00 lb.
- Front Section (one piece): 16.00 lb.
(head pipes, catalytic converter, EXUP, midpipe, etc.)
Total = 23.00 lb.
CT Single™ Full System:
- Muffler: 3.40 lb.
- Head Pipes: 2.85 lb.
- Collector: 0.45 lb.
- Midpipe: 0.90 lb.
- Hardware: 2.00 lb.
Total = 9.60 lb.
Total Weight Savings = 13.4 lb. or 58% of OEM weight
