Brock's Performance Integrated Safety Kill Switch w/ Coiled Lanyard for Gen 3 Hayabusa
Whether you’re a weekend cruiser or a hardcore racer, accidents can happen. Our XDA Approved, Integrated Safety Kill Switch, helps minimize secondary injuries by ensuring your bike doesn’t become a hazard after a spill. The Brock's Performance Integrated Safety Kill Switch is lightweight, weatherproof, and installation is fast and easy. While most modern fuel injected motorcycles are equipped with an OEM tip-over sensor, many race organizations require an additional wrist kill tether that can be quickly checked for functionally at pre-race safety inspection, before the bike is allowed to make a pass.
The Brock’s Performance Team, in conjunction with the powersports kill switch industry experts PMR Components have made sure that installation is quick, easy and hassle-free!
Remove the front of the brake or clutch master cylinder clamp on the right or left handlebar (rider preference) and install the Safety Kill Switch in its place (torque included mounting screws to 7 ft-lbs.). Install the included wiring harness in line with the right switch assembly located under the right-side dash panel. Run the Kill Switch lead wire along the OEM wire harness and plug into the newly installed inline wiring harness. Secure the Kill Switch lead along the OEM wire harness using zip ties. Ensure the bike's handlebars can be moved from stop to stop without binding. Installation is now complete!
Remember: If you are going to be Stupid Fast... make sure you are Stupid Safe also!
- Simple plug-and-play installation
- Includes complete kill tether, wiring harness, and handle bar mount with corrosion-free stainless hardware
- Race approved tether constructed of coiled/coated aircraft cable with metal retaining crimps
- Strong corrosion-free all metal snap hook
Note: NOT for use with a Brock's Performance Super Stock Box (Original or V2.0); see P/N: 932593
