- 20" megaphone muffler
- Black ceramic coated finish
- 2.25” outlet removable baffle
- Classic megaphone look with billet removable baffle
- Our deepest sound (optional 2.25" noise reduction inserts sold separately)
- Race performance for all size engines
- Aerospace quality, ultra lightweight stainless construction
- 58% weight savings vs OEM full system
- NOT compatible with OEM or aftermarket center stand
- Includes one 18mm bung for wideband O2 sensor (block-off plug included)
- 3oz. tube of Permatex Ultra Copper® supplied with purchase
- Includes PAIR block-off cap & instructions for decel-pop reduction
- Includes muffler, front section, flanges & necessary hardware
- Includes Brock's lifetime direct support package at no additional charge
- Select from increased drivability/fuel mileage (pump gas) or race-proven (race fuel) track maps via our map support program at no additional charge
- Click here to view logo plate color options
- Click here to view Installation Instructions
- Click here for PAIR block-off instructions
Dyno Charts:
- Z900RS (2018) Stock vs. S2B Full Package w/ Sprint Filter P08
- Z900RS (2018) Stock vs. S2B Full Package w/ Sprint Filter P08 F1-85
The Best of Both Worlds
The StreetMeg™ combines our Generation 3 front section and sidewinder megaphone muffler to provide race-proven performance with a classic drag race look. Eliminating the inherent drawbacks of a side exit system, there is no reduced right hand cornering clearance, or rear brake lever-to-pipe clearance issues. No fairing modifications are required, and the stock oil cooler and lines remain intact. From carving corners, to wide open on the salt flats, the drag-inspired look and deep throaty sound of the StreetMeg™ says, “Let’s RACE!”
Z900RS (2018) Exhaust System Decibel Levels
Testing procedure performed according to SAE J2825
StreetMeg Full System:
Idle: 91 dBA / 5000 RPM: 106 dBA
StreetMeg Full System (with Noise Suppressor):
Idle: 84 dBA / 5000 RPM: 98 dBA
Z900RS Exhaust Weight Comparison
OEM Full Exhaust System:
- Muffler: 4.80 lb.
- Catalytic Converter / Head Pipes: 21.35 lb.
Total = 26.15 lb.
Brock's Performance StreetMeg Full System:
- Muffler: 3.75 lb.
- Head Pipes w/ Flanges: 5.10 lb.
- Collector: 1.55 lb.
- Hardware: 0.50 lb.
Total = 10.90 lb.
Total Weight Savings = 15.25 lb. or 58% of OEM weight